AI Fruit Sorter Acceptance Metrics: What to Agree Before FAT and SAT

AI Fruit Sorter Acceptance Metrics: What to Agree Before FAT and SAT

An AI fruit sorter should be accepted against an agreed product decision, not a demonstration in which it appears to work. Before factory acceptance testing (FAT) or site acceptance testing (SAT), define the fruit, grade rules, sample basis, capacity definition, inspection scope, outlet routes and method for checking correct placement. A result is valid only in the stated test conditions, not for every variety, defect, season or packing programme.

Start With the Packhouse Decision

Acceptance testing should confirm whether the proposed line can make the sorting decisions that matter to the packhouse. It is not a generic proof that AI is working.

Begin by documenting the commercial routes the line must support. For each route, state what fruit belongs there, which attribute defines the decision and what happens after the fruit leaves the sorter. A premium retail grade, a wholesale grade, a processing route and a controlled reject route may each require different rules and downstream capacity.

Decision to verify What should be agreed before the test Why it matters
Fruit basis Fruit type, variety, size range, condition, lot history and seasonal context Results from one fruit condition cannot automatically be transferred to another.
Grade rules The size, weight, colour, visible condition or other agreed attributes for every output grade A sorter cannot be assessed fairly if the required grade boundary is unclear.
Inspection scope Which attributes are included and which are outside the test External appearance, size/weight and internal-quality targets need different evidence.
Route after sorting The intended outlet, packing format or next process for each grade A correct decision has little value if the receiving route cannot handle it.
Acceptance method How individual fruit or test groups will be checked against the agreed grade rule This makes the result auditable rather than a visual impression.

The result is a test plan agreed before the final configuration is judged, not created afterwards to explain a result.

Separate FAT From SAT

FAT and SAT have different purposes. They should not be treated as duplicate demonstrations.

FAT normally confirms the supplied configuration, safety functions, controls, mechanical operation and agreed test logic before shipment or final dispatch. If representative fruit is available, it can also test the agreed grade rules under stated conditions.

SAT confirms the installed process with the customer’s receiving and feeding conditions, product presentation, grade discharge, packing interface, utilities and controls. Site conditions may reveal restrictions not visible during FAT.

A final acceptance document should state which observations belong to FAT and which are verified only at SAT. This avoids treating site-dependent questions as factory defects or factory-only checks as proof of full packhouse performance.

Define Capacity as a Test Condition

Capacity should be specified with a clear basis. “The line runs at a stated number of tonnes per hour” is incomplete unless the test states what material is being measured and where in the line the measurement is taken.

The plan should state whether capacity refers to raw input, the sorting section, the inspection zone, grade outlets or completed pack-ready output.

Record fruit size and weight distribution, feed consistency, grade mix, line speed, run period and planned stops. A high-volume outlet, packing station or case-handling process may become the real restriction even when the sorter carries the total requested mass.

Capacity acceptance should therefore be read with outlet records. Each grade needs a stated route and a way to show whether it can receive fruit at the required condition.

Agree How Correct Placement Will Be Checked

“Accuracy” is too vague for an acceptance record. A useful test distinguishes the different ways in which a fruit can be routed incorrectly.

Test result Meaning Project impact
Correct placement Fruit reaches the outlet defined by the agreed grade rule Shows the intended grading route is working for the stated sample and conditions.
Cross-grade error Fruit is sent to the wrong saleable grade Can create over-specification, under-specification or packaging inconsistency.
False reject Fruit that meets the agreed grade rule is sent to reject or a lower-value route Can reduce pack-out or create unnecessary handling.
False accept Fruit that fails the agreed grade rule remains in a saleable route Can expose the buyer’s pack to quality or consistency risk.
Unassessed sample Fruit cannot be used for the comparison because tracking, presentation or reference checking failed Must be recorded separately rather than hidden inside the result.

For each traceable test fruit or group, agree a reference decision: for example, a calibrated size/weight check, agreed visual standard or manual inspection. Internal quality, if proposed, requires its own reference method and sample plan; it cannot be inferred from external appearance.

Show test units in every category, not only a combined percentage. This reveals which errors matter commercially and whether the sample covered real grade boundaries.

Use Representative Fruit and Borderline Cases

An acceptance sample should represent the commercial problem, not an ideal demonstration lot. Include normal, non-conforming and borderline fruit.

Record at least:

  • variety, origin, harvest/storage context and sample date;
  • relevant size and weight range and agreed grade attributes;
  • upstream product state and intended outlet; and
  • the reference result used to check placement.

The purpose is to compare the sorting decision with the grade rule on fruit that reflects the customer’s operating question. Where fruit changes across a season, state whether the test covers one lot only or needs later review.

Confirm Product Presentation and Gentle Handling

Inspection performance begins before the inspection station. Overlap, unstable spacing, wet surfaces, residual material, unsuitable orientation or inconsistent feeding can affect inspection and routing.

Review receiving, buffering, feeding, singulation, inspection-zone transfer, outlet timing and transfer to packing or rework. For gentle handling, agree where fruit condition will be observed and how any damage or abnormal transfer is recorded.

Test the Downstream Interface, Not Only the Sorter

A sorting decision is complete only when the correct fruit reaches a usable downstream route. During acceptance, verify that each discharge point, accumulation area, packing station or process connection matches the agreed grade plan.

Questions to review include:

  • Can each outlet receive its expected grade flow without unmanaged accumulation?
  • Is the packing method matched to the grade and product presentation arriving there?
  • Are product changes, packing-material replenishment and operator access considered?
  • Is there a controlled route for rework, hold or reject product?
  • Can the project team review the relationship between inspection records and finished packs or batches where required?

The acceptance scope should state which interfaces are included, observed or remain the customer’s separate responsibility.

Include Cleaning, Training and Handover in Acceptance

The line is not ready for handover simply because it can run a test sample.

Review the practical handover items:

  • cleaning and maintenance access;
  • operator, supervisor and maintenance training;
  • operating records and fault-handling guidance; and
  • commissioning records, outstanding actions and the handover point.

They determine whether the customer can repeat the agreed process after the demonstration team leaves.

Build One Acceptance Record Before the Test

Before FAT or SAT, compile one acceptance record that both parties can use. It should contain the fruit basis, grade definitions, included inspection scope, test conditions, capacity basis, reference method, outlet plan, records to be collected and decision process for any material difference.

The record should distinguish three outcomes:

  • confirmed within the stated test conditions;
  • requiring an agreed follow-up action; and
  • outside the current acceptance scope.

This structure avoids a common project problem: treating an untested capability, a site interface or a future seasonal condition as either an automatic pass or an automatic failure. It gives the buyer, supplier and operating team one shared basis for the final discussion.

FAQ

What Is the Most Important Metric in a Fruit Sorter Acceptance Test?

There is no single metric. The required measure follows the commercial grade decision. A useful acceptance record combines capacity at a stated test condition, correct placement by grade, false rejects, false accepts, cross-grade errors, handling observations and downstream outlet performance.

Can a FAT Replace a Site Acceptance Test?

No. FAT checks the delivered configuration and agreed test logic before shipment or final dispatch. SAT checks the installed line with the customer’s fruit flow, site interfaces, utilities, operators and packing conditions.

Should an Acceptance Test Use Only Defective Fruit?

No. It should include normal commercial fruit, non-conforming fruit and borderline cases. A test made only of obvious examples does not show how the proposed rule performs near the real grade boundary.

How Should Internal Quality Be Included in Acceptance?

Only as a separately agreed scope. The target condition, reference assessment, representative sample and decision criteria must be defined before the test. An external optical sorting result does not itself validate an internal-quality target.

What Happens If One Grade Outlet Cannot Keep Up?

Record the condition and identify the cause before final acceptance. The restriction may lie in the outlet, accumulation, packing method, operator workflow or finished-product handling rather than in the inspection station. The project should agree whether it requires a configuration change, operating adjustment or follow-up action.

Plan an Acceptance Framework Around Your Grade Rules

If you are planning a new fruit sorting line or upgrading an existing packhouse, share your fruit type and variety, expected capacity basis, target grades, representative sample availability, current packing route and site layout.

SORTTURNKEY can help structure an initial acceptance framework covering the sample basis, grade definitions, capacity condition, outlet records, FAT/SAT responsibilities and the information needed for a project review.

Request a fruit sorting acceptance framework through the Contact Us page.

You Can Share This